3M Clean-Trace NG Luminometer

Small, Powerful, Simple...

•Measures light from Clean-Trace surface and water tests

•Store & Transfer results to Clean-Trace Data Trending Software (Biotrack Plus)

•Self-Calibration check at start-up

Simple menus, multi-lingual

Measure Mode

§Results displayed, not stored

Program Mode

§Requires Sample Plan

§Data shown & stored

Once the sample plan has been created on the computer, it can be transferred to the hand-held luminometer.  The hand-held luminometers will allow the user to select the user, the sample plan, and then the test point to be measured.

If the measurement is higher than the fail limit, the instrument will indicate to the user that it is a fail, allowing them to re=clean and then re-test the result.

Ideally, both the original test result and the retest results will be stored in the memory of the instrument and then transferred to the computer.